home,page,page-id-3464,page-template,page-template-full_width-php,ajax_fade,page_not_loaded,,,wpb-js-composer js-comp-ver-3.6.12,vc_responsive

Nozzle types

Standard Flat Fan nozzles (F-110)

Recommended for all types of pesticide application where optimum coverage is demanded.

(Read more)

All-round flat fan nozzle. Recommended for all types of pesticide application where optimum coverage is demanded. This nozzle will give you excellent and uniform liquid distribution at boom heights from 35 to 70 cm (50 cm recommended to take care of uneven terrain or boom movements).

  • ISO: Flow, colour and outer dimensions
  • Working pressure: 1.5 to 5 bar
  • Recommended for TWIN sprayers
  • SYNTAL – precision moulded thermoplastic
  • CERAMIC – extremely high durability
  • COLOR TIPS – for safe and easy handling
 

LowDrift nozzles

LowDrift nozzles are recommended when optimum spraying conditions cannot be achieved (risk of drift) and spraying cannot be postponed.

(Read more)

LowDrift nozzles are recommended when optimum spraying conditions cannot be achieved (risk of drift) and spraying cannot be postponed.

  • ISO: Flow, colour and outer dimensions
  • Working pressure: 1.5 to 5 bar
  • Restrictor designed for minimum chemical residues
  • SYNTAL – precision moulded thermoplastic
  • CERAMIC – extremely high durability
  • COLOR TIPS – for safe and easy handling

This nozzle will give you excellent and uniform liquid distribution at boom heights from 35 to 70 cm (50 cm recommended to take care of uneven terrain or boom movements).

 

MINIDRIFT nozzles

The MINIDRIFT nozzle will at low pressures reduce drift to a minimum.

(Read more)

The HARDI MINIDRIFT nozzle can be used for spraying at sub-optimal weather conditions, when spraying cannot be postponed. The MINIDRIFT nozzle will at low pressures reduce drift to a minimum.

  • Air inclusion nozzle
  • Working pressure: 1 to 5 bar
  • ISO flow, colours, sizes and nomenclature
  • Application rates from 60 to 400 l/ha (at 8 km/h)
  • SYNTAL – precision moulded thermoplastic

This nozzle will give you excellent and uniform liquid distribution at boom heights from 40 to 90 cm. The droplet spectrum is coarse to very coarse; safe for drift control but without risking poor coverage and deposition on leaves. The venturi can easily be removed for cleaning the nozzle.

 

MINIDRIFT DUO nozzles

The MINIDRIFT DUO nozzle will at low pressures reduce drift to a minimum.

(Read more)

The HARDI MINIDRIFT DUO nozzle can be used for spraying at sub-optimal weather conditions, when spraying cannot be postponed. The MINIDRIFT nozzle will at low pressures reduce drift to a minimum.

  • Working pressure: 1.5 to 6 bar
  • ISO flow, colours, sizes and nomenclature
  • 30° forward and backward angle
  • Application rates from 125 to 420 l/ha (at 8 km/h)
  • SYNTAL – precision moulded thermoplastic

This compact flat spray air-injector nozzle offers droplet spectrum from medium to very coarse; safe for drift control but without risking poor coverage and deposition on leaves. The two angled fans increase the number of droplets and impacts on target compared to normal air injector nozzles. This improves the coverage on dense foliage and vertical targets. The injector can easiily be removed for cleaning the nozzle.

 

INJET nozzles

The HARDI INJET nozzles are recommended for most pesticide applications where reduced risk of drift is demanded.

(Read more)

The HARDI INJET nozzles can be used for spraying at sub-optimal weather conditions, or when spraying cannot be postponed. The HARDI INJET nozzles are recommended for most pesticide applications where reduced risk of drift is demanded.

  • Air inclusion nozzles with greater drift reduction
  • ISO flow, colours and nomenclature
  • Application rates from 60 – 600 l/ha (at 8 km/h)
  • Pressure range: 3 – 8 bar
  • B-Jet border nozzle for precise application near sensitive areas
  • Available in SYNTAL and CERAMIC materials

The HARDI INJET & B-JET nozzles can be mounted using the 334083 ISO/INJET cap.

 

QUINTASTRREAM nozzles

Five [5] streams of liquid are distributed at different angles and flows by each Quintastream nozzle.

(Read more)

Five [5] streams of liquid are distributed at different angles and flows by each Quintastream nozzle. Highest flow is from the middle stream and lowest in the outer, overlapping streams. HARDI QUINTASTREAM can be mounted using the filter casing without gasket (725737).

  • The fastest way to convert your sprayer into a high precision fertilizer applicator
  • 5 solid streams that minimise crop scorching
  • Particularly important for wide booms at fast speeds
  • ISO standard for easy calibration
  • Turn and Clean key for restrictor removal
  • Boom height 35-100 cm

Uniquely, this - patent pending - system allows for boom movements that do not influence distribution.

 

F-80 - Flat Fan nozzles

This nozzle has an 80° spray angle. On boom sizes from 24 to 36 m the boom height is often higher than 50 cm above the target.

(Read more)

This nozzle has an 80° spray angle. On boom sizes from 24 to 36 m the boom height is often higher than 50 cm above the target. 80° nozzles provide good coverage with reduced drift risk at these higher boom heights and are also adaptable to band spraying.

  • ISO: Flow, colour and outer dimensions
  • 80° spray angle
  • Working pressure: 1.5 to 5 bar
  • SYNTAL – precision moulded thermoplastic
  • CERAMIC - extremely high durability

The 80° nozzle is suitable for big booms or row crop / band spraying with either low boom or nozzles at droplegs. 

 

DUOCAP

Fitted with two Flat Fan or LowDrift nozzles HARDI DUOCAP will give Fine to Medium spray, suitable for fungicide spraying.

(Read more)

HARDI DUOCAP gives you higher volume rate while still maintaining proper droplet size. Fitted with two Flat Fan or LowDrift nozzles HARDI DUOCAP will give Fine to Medium spray, suitable for fungicide spraying. 
Two different nozzles can be used.A Standard and a MINIDRIFT nozzle will give you the dual benefit of having fine droplets that ensures good coverage in the top of the crop and Coarse droplets that penetrates to the lower and more dense areas.


HARDI DUOCAP fitted with two MINIDRIFT nozzles will give superior penetration into dense crops like Potatoes and Soybeans.

Double-up your application

  • Improved coverage
  • Angled spray ensures penetration i dense crops
  • Can hold all ISO nozzles
  • 30° forward and backward angle
 

Cone nozzle - 1553

HARDI 1553 Cone nozzles are used without swirl plates for solid stream and with swirl plates for hollow cone and full cone spraying

(Read more)

HARDI 1553 Cone nozzles are used without swirl plates for solid stream and with swirl plates for hollow cone and full cone spraying.

Use the solid stream for liquid fertilizer on boom sprayers.

  • For application of liquid fertilizer at 25 cm nozzle spacing, with a minimum risk of scorching
  • Flow rates from 0.29 – 22 l/min (at 1 –10 bar)
  • SYNTAL – precision moulded thermoplastic: precise, resistant and durable